Fascia Replacement in Richmond Hill (TW10) — uPVC Fascias, Soffits & Guttering

Why fascias, soffits and guttering go together in Richmond Hill

On most TW10 homes the fascia board, soffit panel and gutter are one continuous system at the eaves. If the timber facias have rotted, water has almost certainly tracked behind the gutter brackets and into the soffit, and the gutter brackets themselves are usually loose. Replacing just the fascia leaves you with a new board screwed to compromised brackets and an old gutter that won't seal at the joints — which is why we quote the three together and refuse single-component patch jobs unless the rest is genuinely sound.

Tall Georgian townhouses with mansards and parapets, substantial Victorian villas towards the Park in Richmond Hill typically run Georgian and early Victorian terraces and villas. That matters because the original eaves timber on anything pre-1980 is usually softwood with no preservative treatment — once it's started to fail at one corner it's normally gone right around the building. We measure every run, photograph the back of the fascia where rot tends to start, and quote on what's actually there rather than averaging it out.

What's included in a Richmond Hill fascia replacement

Survey and measure
On-site measure of every eaves run, every gable, every bay. We check soffit depth, rafter feet condition, and existing gutter sizing — TW, KT and SW houses vary far more than they look.
Strip old fascias, soffits and guttering
Scaffold up, gutters drained and removed, soffit panels pulled, fascia boards lifted. Rotten rafter feet are cut back and new treated timber sistered on before the new fascia goes anywhere near it.
New uPVC fascias and soffits
Full 18mm or 25mm uPVC fascia board (with 9mm vented or solid uPVC soffit) in your chosen colour, mechanically fixed every 600mm into sound timber — never just nailed to the old board.
All-new gutters and downpipes
112mm half-round or 114mm square uPVC gutters at the correct fall (1:600 minimum), new brackets every 800mm, full-length downpipes back into existing or new gullies. Pressure-tested before sign-off.

Richmond Hill job logistics

Postcode district: TW10
Local authority: Richmond upon Thames
From our TW12 yard: 6.5 km
Typical drive time: ≈ 14 min
Nearest major route: A316 trunk
Landmark reference: Terrace Gardens

Indicative fascia replacement pricing in Richmond Hill

Real ranges from recent TW10-area work. Final price always comes from an on-site measure, not a list.

Property	Typical scope	Indicative
Mid-terrace	~12m fascia, 12m soffit, front & rear gutter	£1,400–£2,200
Semi-detached	~18m fascia, gable end, all gutters & downpipes	£1,900–£3,200
Detached	~30m+ fascia, multiple gables, full perimeter gutters	£3,200–£5,500
Bay add-on	Per bay roof — lead apron + gutter dressing	+£300–£600

A bit of local context

Richmond Hill sits in the TW10 postcode district under Richmond upon Thames Council, in the Greater London part of our Richmond corridor coverage. The nearest major road link is A316 trunk, with day-to-day access via A307 Richmond Hill and A305. Local landmarks people commonly use as reference points include Terrace Gardens, King Henry's Mound, Richmond Park gates, and the nearest commercial centre is Richmond town centre. Via the A316 — about 25 minutes.

Postcode: TW10
Council: Richmond upon Thames
Nearest motorway: A316
From our base: 6.5 km

Recent fascia & guttering work near Richmond Hill

Natural slate pitched roof on a period property — fascia guttering in Richmond Hill, TW10 — Natural slate pitched roof on a period property — Richmond Hill

New uPVC fascia, soffit and guttering — fascia guttering in Richmond Hill, TW10 — New uPVC fascia, soffit and guttering — Richmond Hill

Victorian terrace with parapet detailing — fascia guttering in Richmond Hill, TW10 — Victorian terrace with parapet detailing — Richmond Hill

Victorian property with rebuilt chimney — fascia guttering in Richmond Hill, TW10 — Victorian property with rebuilt chimney — Richmond Hill

Roof repair — lead flashing and tile replacement — fascia guttering in Richmond Hill, TW10 — Roof repair — lead flashing and tile replacement — Richmond Hill

Emergency leak repair — fascia guttering in Richmond Hill, TW10 — Emergency leak repair — Richmond Hill

Working in Richmond Hill

We've rebuilt parapet box gutters and re-leaded mansard cheeks on Richmond Hill properties.

Richmond Hill conservation area with strict like-for-like requirements; views to the Thames are protected. Via the A316 — about 25 minutes.

Fascia, Soffits & Guttering in nearby areas

Frequently asked questions

How much does a full fascia replacement cost in Richmond Hill?

A typical 3-bed semi in TW10 is usually £1,800–£3,200 for full fascias, soffits and guttering — depending on eaves length, whether the original timbers are rotten and need rebuilding, and whether you choose white or a coloured/woodgrain uPVC. We quote on-site after measuring, not from photos.

Do you replace facias, soffits and guttering as one job in Richmond Hill?

Yes — and it's almost always cheaper to do all three together. The scaffolding goes up once, the eaves are exposed once, and you get a fully sealed eaves detail rather than mixing old and new components. We rarely recommend a fascia-only job unless the soffits and gutters are genuinely recent.

How long does fascias replacement take on a Richmond Hill house?

A semi-detached or terrace is normally a 2–3 day job, a detached takes 3–5 days. Scaffolding stays up for the duration. We arrive each morning and tidy down each evening — no skip on the road overnight unless agreed.

Do I need scaffolding for fascia replacement in TW10?

For anything above single-storey eaves, yes — towers and ladders aren't safe for the volume of cutting and lifting involved. Scaffolding is included in our quote and erected by a CISRS-trained team.

What's included when you renew the gutters?

New 112mm half-round or 114mm square-line uPVC gutters, all new brackets at correct fall, new round or square downpipes connected back into existing gullies, plus leaf guards on request. We pressure-test every run before leaving site.

Can I have black or coloured fascias instead of white?

Yes — anthracite grey, black, rosewood and golden oak are all in stock with our suppliers and add about 10–15% to a white quote. We bring sample boards to the survey so you can see them against your brickwork.

In summary

Full fascias, soffits and guttering replacement in Richmond Hill (TW10) by a family-run, fully-insured local team. Honest measure, no high-pressure quote, scaffolding included, finished in 2–5 days with a 10-year workmanship guarantee.

Fascia Replacement in Richmond Hill