Why fascias, soffits and guttering go together in Richmond
On most TW9 homes the fascia board, soffit panel and gutter are one continuous system at the eaves. If the timber facias have rotted, water has almost certainly tracked behind the gutter brackets and into the soffit, and the gutter brackets themselves are usually loose. Replacing just the fascia leaves you with a new board screwed to compromised brackets and an old gutter that won't seal at the joints — which is why we quote the three together and refuse single-component patch jobs unless the rest is genuinely sound.
Tall terraced townhouses, mansion blocks and detached villas in Richmond typically run mixed Georgian, Victorian, Edwardian and modern infill. That matters because the original eaves timber on anything pre-1980 is usually softwood with no preservative treatment — once it's started to fail at one corner it's normally gone right around the building. We measure every run, photograph the back of the fascia where rot tends to start, and quote on what's actually there rather than averaging it out.
What's included in a Richmond fascia replacement
Survey and measure
On-site measure of every eaves run, every gable, every bay. We check soffit depth, rafter feet condition, and existing gutter sizing — TW, KT and SW houses vary far more than they look.
Strip old fascias, soffits and guttering
Scaffold up, gutters drained and removed, soffit panels pulled, fascia boards lifted. Rotten rafter feet are cut back and new treated timber sistered on before the new fascia goes anywhere near it.
New uPVC fascias and soffits
Full 18mm or 25mm uPVC fascia board (with 9mm vented or solid uPVC soffit) in your chosen colour, mechanically fixed every 600mm into sound timber — never just nailed to the old board.
All-new gutters and downpipes
112mm half-round or 114mm square uPVC gutters at the correct fall (1:600 minimum), new brackets every 800mm, full-length downpipes back into existing or new gullies. Pressure-tested before sign-off.
Richmond job logistics
- Postcode district
- TW9
- Local authority
- Richmond upon Thames
- From our TW12 yard
- 6.3 km
- Typical drive time
- ≈ 14 min
- Nearest major route
- A316/M3 corridor
- Landmark reference
- Richmond Park
Indicative fascia replacement pricing in Richmond
Real ranges from recent TW9-area work. Final price always comes from an on-site measure, not a list.
| Property | Typical scope | Indicative |
|---|---|---|
| Mid-terrace | ~12m fascia, 12m soffit, front & rear gutter | £1,400–£2,200 |
| Semi-detached | ~18m fascia, gable end, all gutters & downpipes | £1,900–£3,200 |
| Detached | ~30m+ fascia, multiple gables, full perimeter gutters | £3,200–£5,500 |
| Bay add-on | Per bay roof — lead apron + gutter dressing | +£300–£600 |
A bit of local context
Richmond sits in the TW9 postcode district under Richmond upon Thames Council, in the Greater London part of our Richmond town coverage. The nearest major road link is A316/M3 corridor, with day-to-day access via A316 Chertsey Road and A307 Petersham Road and A205 South Circular. Local landmarks people commonly use as reference points include Richmond Park, Richmond Green, Kew Gardens, and the nearest commercial centre is Richmond town centre (TW9). Direct route via the A316 — usually 20 minutes from base.
- Postcode
- TW9
- Council
- Richmond upon Thames
- Nearest motorway
- A316/M3
- From our base
- 6.3 km
Recent fascia & guttering work near Richmond






Working in Richmond
We've done parapet-gutter rebuilds in Richmond town and slate work on the larger Petersham-side villas.
Substantial conservation-area coverage; many listed buildings. Direct route via the A316.
Fascia, Soffits & Guttering in nearby areas
- Fascia, Soffits & Guttering in St Margarets1.7 km away
- Fascia, Soffits & Guttering in Kew2.2 km away
- Fascia, Soffits & Guttering in East Sheen2.5 km away
- Fascia, Soffits & Guttering in Twickenham2.6 km away
- Fascia, Soffits & Guttering in East Twickenham0.8 km away
- Fascia, Soffits & Guttering in Richmond Hill1.1 km away
- Fascia, Soffits & Guttering in North Sheen1.7 km away
- Fascia, Soffits & Guttering in Syon Park1.8 km away
Frequently asked questions
How much does a full fascia replacement cost in Richmond?
A typical 3-bed semi in TW9 is usually £1,800–£3,200 for full fascias, soffits and guttering — depending on eaves length, whether the original timbers are rotten and need rebuilding, and whether you choose white or a coloured/woodgrain uPVC. We quote on-site after measuring, not from photos.
Do you replace facias, soffits and guttering as one job in Richmond?
Yes — and it's almost always cheaper to do all three together. The scaffolding goes up once, the eaves are exposed once, and you get a fully sealed eaves detail rather than mixing old and new components. We rarely recommend a fascia-only job unless the soffits and gutters are genuinely recent.
How long does fascias replacement take on a Richmond house?
A semi-detached or terrace is normally a 2–3 day job, a detached takes 3–5 days. Scaffolding stays up for the duration. We arrive each morning and tidy down each evening — no skip on the road overnight unless agreed.
Do I need scaffolding for fascia replacement in TW9?
For anything above single-storey eaves, yes — towers and ladders aren't safe for the volume of cutting and lifting involved. Scaffolding is included in our quote and erected by a CISRS-trained team.
What's included when you renew the gutters?
New 112mm half-round or 114mm square-line uPVC gutters, all new brackets at correct fall, new round or square downpipes connected back into existing gullies, plus leaf guards on request. We pressure-test every run before leaving site.
Can I have black or coloured fascias instead of white?
Yes — anthracite grey, black, rosewood and golden oak are all in stock with our suppliers and add about 10–15% to a white quote. We bring sample boards to the survey so you can see them against your brickwork.
In summary
Full fascias, soffits and guttering replacement in Richmond (TW9) by a family-run, fully-insured local team. Honest measure, no high-pressure quote, scaffolding included, finished in 2–5 days with a 10-year workmanship guarantee.
